Recommended thickness - 180 mils.
	Application temperature -400° F to 430° F.
	Application rate is approximately 4 miles per hour
	GulfLine is applied when the surface temperature is 60° F or above.
	Utilizes an alkyd or hydrocarbon granular resin system.
	One ton of thermoplastic produces approximately 5000 linear feet of 4" GulfLine.
	Flashpoint of thermoplastic not less than 475° F.
	Utilizes a dual coated, double drop glass bead system.
	Requires approximately 500 pounds of drop-on glass beads per ton of 4" thermoplastic applied.
	GulfLine is applied with an epoxy sealer when striping over more than one light coat of existing paint, old bleached asphalt, all portland cement concrete pavement and on all surfaces when the ambient temperature is below 70° F.
	GulfLine thermoplastic is packaged in 50 lb. thermo-degradable plastic bags.